CANOGA PERKINS 9175 Command Reference - Manual (Page 573)

CanogaOS Command Reference
31-34
show qos aggregator-policer (NAME|)
NAME: Specify a aggregator-policer name, if not specify, all aggregator-policer will be shown
Command Mode
Privileged EXEC
Usage
This command is used to show aggregator-policer information.
Examples
Switch# show qos aggregator-policer
AGGREGATOR-POLICER-NAME: agg_plc
CIR 40000 kbps, CBS 40000 bytes, PBS 40000 bytes, color aware mode, drop color is red
use-l3-length
Switch#
Related Commands
None
31.53 show qos interface
Use this command to show interface all qos information.
Command Syntax
show qos interface NAME
Command Mode
Privileged EXEC
Usage
This command is used to show aggregator-policer information.
Examples
Switch#show qos interface eth-0-1
Ingress port policer:
CIR 15000 kbps, CBS 12388 bytes, EBS 131264 bytes, color aware mode, drop color is red
Interface trust state: cos
Interface default CoS value: 0
Schedule mode: SP(between Class), WDRR(between queue in the same Class)
The number of class on interface: 4
Strict priority class ID: 3 2 1 0
The number of egress queue: 8
Queue 0 class 0, bandwidth percent 12.5
Tail drop mode
Tail drop threshold(drop prec 0 -> 3): 56 60 64 108