CANOGA PERKINS 9175 Command Reference - Manual (Page 712)

CanogaOS Command Reference
40-41
command.
Command Syntax
debug ospf [all | events | ifsm | lsa | nfsm | nsm | packet | route]
no debug ospf [all | events | ifsm | lsa | nfsm | nsm | packet | route]
all Enable all debugging.
events OSPF events information.
ifsm OSPF Interface State Machine.
lsa OSPF Link State Advertisement.
nfsm OSPF Neighbor State Machine.
nsm OSPF NSM information.
packet OSPF packets.
route OSPF route information.
Command Mode
Privileged EXEC
Usage
Examples
The following is sample output from the debug ospf command:
Switch# debug ospf all
Related Commands
40.55 debug pim sparse-mode
To display Protocol Independent Multicast (PIM) packets received and sent, and to display PIM-related
events, use the debug pim command in privileged EXEC mode. To disable debugging output, use the
no form of this command.
Command Syntax
debug pim sparse-mode {all | events | mfc | mib | mtrace | nexthop | nsm | packet | state | timer}
no debug pim sparse-mode {all | events | mfc | mib | mtrace | nexthop | nsm | packet | state |
timer}
all All PIM debugging.
events PIM events.
mfc PIM MFC updates.
mib PIM mib.
mtrace Mtrace messages.
nexthop PIM nexthop.
nsm NSM message.
packet PIM packet.