5 vpls-description, 6 no vpls-descriptionno vpls-description – CANOGA PERKINS 9175 Command Reference User Manual
Page 522
CanogaOS Command Reference
29-4
29.5 vpls-description
Use this command to add characters describing for VPLS instance.
Command Syntax
vpls-description LINE
Syntax Description
LINE
Characters describing the VPLS instance
Command Mode
VPLS mode
Examples
In the following example, the vpls-description command is used to add
characters describing for VPLS instance:
Switch# configure terminal
Switch (config)#mpls vpls vpls1 1
Switch (config-vpls)#
vpls-description this is a good vpls instance
Related Commands
29.6 no vpls-descriptionno vpls-description
Use this command to remove characters describing about the VPLS instance.
Command Syntax
no vpls-description
Syntax Description
This command has no arguments or keywords.
Command Mode
VPLS mode
Examples
In the following example, the no vpls-description command is used to remove
characters describing about the VPLS instance:
Switch# configure terminal
Switch (config)#mpls vpls vpls1 1
Switch (config-vpls)#
no vpls-description
Related Commands