CANOGA PERKINS 9175 Command Reference - Manual (Page 245)

CanogaOS Command Reference
15-36
Timer intervals configured, Hello 10, Dead 40, Wait 40, Retransmit 5
Hello due in inactive
Adjacency state Down
Related Commands
15.41 timers spf
To turn on Open Shortest Path First (OSPF) shortest path first (SPF) throttling, use the timers spf
command in router configuration mode. To turn off SPF throttling, use the no form of this command.
Command Syntax
timers spf spf-start spf-hold
no timers spf
spf-start Indicates the initial SPF schedule delay in seconds. Value range is 0 to
2147483647 seconds.
spf-hold Indicates the minimum hold time between two consecutive SPF calculations.
Value range is 0 to 2147483647 seconds.
Default
SPF timer is not set.
Command Mode
Router configuration
Usage
Examples
The following example shows a router configured with the start, and hold values for the timers spf
command set at 5, and 10 seconds, respectively.
router ospf 1
router-id 10.10.10.2
timers spf 5 10
redistribute static
network 10.21.21.0/24 area 0
network 10.22.22.0/24 area 00
Related Commands