CANOGA PERKINS 9175 Command Reference - Manual (Page 711)

CanogaOS Command Reference
40-40
and to learn the status of the multicast routing process, or why packets are forwarded out of particular
interfaces.
Examples
The following is sample output from the debug ip igmp command:
Switch# debug ip igmp
Related Commands
debug pim sparse-mode
40.53 debug stp
To debug spanning-tree activities, use the debug stp command in privileged EXEC mode. To disable
debugging output, use the no form of this command.
Command Syntax
debug stp {all | cli | packet [rx | tx] | protocol [detail] | timer [detail]}
no debug stp {all | cli | packet [rx | tx] | protocol [detail] | timer [detail]}
all Debug all information of spanning-tree.
cli Debug CLI commands.
packet Decode spanning-tree receptions and transmissions.
rx (Optional) Only debug spanning-tree receptions.
tx (Optional) Only debug spanning-tree transmissions.
protocol [detail] Debug spanning-tree protocols. The keyword detail is optional.
timer [detail] Debug spanning-tree timer. The keyword detail is optinal.
Command Mode
Privileged EXEC
Usage
Examples
The following is sample output from the debug stp command:
Switch# debug stp all
Related Commands
40.54 debug ospf
To display information on Open Shortest Path First (OSPF), use the debug ospf command in privileged
EXEC mode. To disable debugging output, use the no form of this