15 show mpls ilm-forwarding, 16 show mpls interface – CANOGA PERKINS 9175 Command Reference User Manual
Page 471
Advertising
CanogaOS Command Reference
26-13
26.15 show mpls ilm-forwarding
Use this command to display MPLS Incoming Label Map table.
Comm
a
nd Syntax
show mpls ilm-forwarding
Syntax description
This command has no arguments or settings.
Command Mode
Privileged EXEC mode
Examples
In the following example, the show mpls ilm-forwarding command is used to
display MPLS Incoming Label Map table:
Switch#
show mpls ilm-forwarding
FEC I/O Label Nexthop Out-Intf
5.5.5.0/24 1024/3 3.3.3.2 eth-0-17
Related Commands
show mpls ilm-database
26.16 show mpls interface
Use this command to display interfaces bound to MPLS interface.
Advertising