CANOGA PERKINS 9175 Command Reference - Manual (Page 406)

CanogaOS Command Reference
24-11
ip pim rp-register-kat <time>
time: <1-65535> KAT time in seconds
Command Mode
Global configuration
Usage
The register message send from dr will add an entry on rp. This entry will be aged when the keepalive
timer expired which can be configured by this command.
Examples
This example shows how to set the keepalive timer to 100s at RP from PIM registers.
Switch(config)#ip pim rp-register-kat 100
This example shows how to return this timer to default value.
Switch(config)#no ip pim rp-register-kat
Related Commands
ip pim rp-address
ip pim rp-candidate
24.18 ip pim spt-switch-threshold infinity
Use this command to set the spt switch threshold to infinity.
To cancel this setting, use the no form of this command.
Command Syntax
ip pim spt-switch-threshold infinity
no ip pim spt-switch-threshold infinity
Command Mode
Global configuration
Usage
The DR will switch to spt immediately when received the first multicast packet by default.
Examples
This example shows how to set the spt switch threshold to infinity.
Switch(config)# ip pim spt-switch-threshold infinity
This example shows how to return the spt-switch-threshold to default.
Switch(config)# no ip pim spt-switch-threshold infinity
Related Commands
show ip pim sparse-mode spt-threshold