37 show spanning-tree brief – CANOGA PERKINS 9175 Command Reference User Manual

Page 128

Advertising
background image

CanogaOS Command Reference

7-25

eth-0-1: Edgeport bpdu-guard Default - Current edgeport bpdu-guard on

eth-0-1: Edgeport bpdu-filter Default - Current edgeport bpdu-filter off

eth-0-1: No root guard configured - Current root guard off

eth-0-1: Configured Link Type auto - Current point-to-point


Related Commands

7.37 show spanning-tree brief

Use this command to show the brief state of the spanning tree.


Command Syntax

show spanning-tree brief

Command Mode

Privileged Exec modes

Default

Usage
Examples

The following is an output of this command displaying the brief state of the spanning tree. The down

interface should not be show.

Switch# show spanning-tree brief

Multiple spanning tree protocol Enabled

Root ID Priority 32768 (0x8000)

Address 34f2.d317.ce01

Hello Time 2 sec Max Age 20 sec Forward Delay 15 sec

Bridge ID Priority 32768 (0x8000)

Address 34f2.d317.ce01

Hello Time 2 sec Max Age 20 sec Forward Delay 15 sec

Aging Time 300 sec

Interface Role State Cost Priority.Number Type

------------------------------------------------------------------------

eth-0-2 Designated Forwarding 20000 128.2 P2p

eth-0-3 Designated Forwarding 20000 128.3 P2p

eth-0-4 Designated Forwarding 20000 128.4 P2p

eth-0-5 Designated Forwarding 20000 128.5 P2p

eth-0-6 Designated Forwarding 20000 128.6 P2p

eth-0-7 Designated Forwarding 20000 128.7 P2p

eth-0-8 Designated Forwarding 20000 128.8 P2p

eth-0-9 Port protocol disabled

Advertising