CANOGA PERKINS 9175 Command Reference - Manual (Page 379)

CanogaOS Command Reference
21-12
21.18 show ip mroute-rpf
Use this command to display rpf information for multicast source.
Command Syntax
show ip mroute-rpf ip_address
ip_address: the source address
Command Mode
EXEC
Usage
None
Examples
This example shows how to display the rpf information for multicast source 10.10.10.11.
Switch# show ip mroute-rpf
RPF information for 1.1.1.1 failed, no route exists
Related Commands
None
21.19 show ip mvif
Use this command to display the information about multicast interface.
Command Syntax
show ip mvif interface
interface: the name of the multicast interface. Show all the multicast interface when the interface is not
specified.
Command Mode
EXEC
Usage
None
Examples
This example shows how to display the information about multicast interface.
Switch# show ip mvif
Related Commands