14 show mpls ilm-database – CANOGA PERKINS 9175 Command Reference User Manual
Page 470
Advertising
CanogaOS Command Reference
26-12
26.14 show mpls ilm-database
Use this command to display MPLS Incoming Label Map table for detail.
Comm
a
nd Syntax
show mpls ilm-database
Syntax descripti
on
This command has no arguments or settings.
Command Mode
Privileged EXEC mode
Examples
In the following example, the show mpls ilm-database command is used to
display MPLS Incoming Label Map table for detail:
Switch#
show mpls ilm-database
Codes: > - selected ILM, p - stale ILM, B - BGP ILM, K - CLI ILM,
L - LDP ILM, R - RSVP-TE ILM, S - SNMP ILM, I - IGP-Shortcut,
U - unknown ILM
Code FEC I/O Label Nexthop Out-Intf
L> 5.5.5.0/24 1024/3 3.3.3.2 eth-0-17
Related Commands
show mpls ilm-forwarding
Advertising