18 show ip vrf – CANOGA PERKINS 9175 Command Reference User Manual
Page 488
Advertising
CanogaOS Command Reference
27-12
27.18 show ip vrf
Use this command to display the routing information of the VRF.
Command Syntax
show ip vrf (VRF-NAME)
VRF-NAME a name used to identify a VRF.
Command Mode
Privileged Exec mode and Exec mode
Usage
This command shows VRF related information, such as interface, Route Distinguisher, Route-target, etc.
Examples
Switch# show ip vrf VRF_A
VRF VRF_A; (table=1)
Related Commands
show ip route vrf
Advertising