13 show dot1x – CANOGA PERKINS 9175 Command Reference User Manual
Page 647
CanogaOS Command Reference
37-10
37.13 show dot1x
Use the show dot1x user EXEC command to display IEEE 802.1x statistics, administrative status, and
operational status for the switch or for the specified port.
Command Syntax
show dot1x [{diagnostics | session-statistics | statistics} [all | interface interface-id]
diagnostics
Display diagnostics of IEEE 802.1x status.
session-statistics
Display session statistics of IEEE 802.1x clients.
statistics
Display statistics of EAPOL packets.
all
Display IEEE 802.1x information of all interfaces.
interface interface-id
Specify an interface.
Command Mode
Privileged EXEC
Usage
Examples
The following is sample output from the show dot1x command:
Switch# show dot1x statistics interface eth-0-1
802.1X statistics for interface eth-0-1
EAPOL Frames Rx: 0 - EAPOL Frames Tx: 323
EAPOL Start Frames Rx: 0 - EAPOL Logoff Frames Rx: 0
EAP Rsp/Id Frames Rx: 0 - EAP Response Frames Rx: 0
EAP Req/Id Frames Tx: 241 - EAP Request Frames Tx: 0
Invalid EAPOL Frames Rx: 0 - EAP Length Error Frames Rx: 0
EAPOL Last Frame Version Rx: 0 - EAPOL Last Frame Src: 0000.0000.0000
Related Commands