CANOGA PERKINS 9175 Command Reference - Manual (Page 451)

CanogaOS Command Reference
25-39
Command Mode
Privileged Exec mode
Examples
In the following example, the show ldp targeted-peers command is used to
display the list of targeted peers configured on the current LSR:
Switch# show ldp targeted-peers
IP Address Interface
1.1.1.3 eth-0-9
Related Commands
25.44 show ldp upstream
Use this command to display the status of all upstream sessions and label
information exchanged.
Command Syntax
show ldp upstream
Syntax description
This command has no arguments or keywords.
Command Mode
Privileged Exec mode
Defaults
This command has no default settings.
Examples
In the following example, the show ldp upstream command is used to display
the status of all upstream sessions and label information exchanged:
Switch# show ldp upstream
Session peer 192.168.11.50:
Upstream state: Established Label: impl-null RequestID: 0 Peer: 192.168.11.50
Attr:
Upstream state: Established Label: impl-null RequestID: 0 Peer: 192.168.11.50
Attr:
Upstream state: Established Label: impl-null RequestID: 0 Peer: 192.168.11.50
Attr: