16 show mpls vpls – CANOGA PERKINS 9175 Command Reference User Manual
Page 529
CanogaOS Command Reference
29-11
Examples
In the following example, the clear mpls vpls command is used to remove
MAC addresses that have been dynamically learned for faster convergence:
Switch#
clear mpls vpls vpls1 mac-addresse
Related Commands
29.16 show mpls vpls
Use this command to display MPLS VPLS instance information.
Comm
a
nd Syntax
show mpls vpls [NAME | detail | mesh]
Syntax description
NAME
Identifying string for VPLS.
detail
Show detailed VPLS information.
mesh
Show MPLS VPLS Mesh Forwarding
information.
Command Mode
Privileged EXEC mode
Examples
In the following example, the show mpls vpls command is used to display
MPLS VPLS instance information:
Switch#
show mpls vpls
Name VPLS-ID MPeers(R) MPeers(T) SPeers State