80 clear line vty, 81 re-username – CANOGA PERKINS 9175 Command Reference User Manual
Page 730
CanogaOS Command Reference
40-59
40.80 clear line vty
To clear a specified line session, use the clear line vty command in privileged EXEC mode.
Command Syntax
clear line vty first [last]
first
The first vty number, the range is 0 to 7.
last
The last vty number, the range is 0 to 7.
Command Mode
Privileged EXEC
Usage
You can specify only the first vty number to clear a specific vty session, or you can specify the last vty
number at the same time to clear a range of vty sessions.
Examples
The following is sample output from the clear line vty command.
Switch# clear line vty 0 7
[OK]
Related Commands
40.81 re-username
To change the username that has been created in local database, use the re-username command in
global configuration mode.
Command Syntax
re-username oldname newname newname
oldname
The original username.
newname
The new username.
Command Mode
Global configuration
Usage
This command can change the usernames only in local database.
Examples
The following is sample output from the re-username command.
Switch(config)# do show usernames
Number User name Privilege Password Rsa Key