CANOGA PERKINS 9175 Command Reference - Manual (Page 323)

CanogaOS Command Reference
18-4
Frequency • timeout • threshold
Command Mode
Ipsla mode
Defaults
Default value is 5 seconds.
Examples
In the following example, the threshold command is used to set the threshold time range:
Switch(config)#ip sla monitor 1
Switch(config-ipsla)# threshold 10
Related Commands
show ip sla monitor
18.6 VRF
To use IP SLA operations in VPNs, use vrf in ipsla mode.
To remove VPN feathers from IP SLA operations, use the no form of this
command.
Command Syntax
vrf vrfname
no vrf
Syntax Description
vrfname Vrf name;
Command Mode
Ipsla mode
Defaults
none
Examples
In the following example, the vrf command is used to use ip sla monitor entry in VPN:
Switch(config-ipsla)#vrf vpn1
Related Commands
Show ip sla monitor