3 ha switchover, 4 line card slot – CANOGA PERKINS 9175 Command Reference User Manual
Page 781
CanogaOS Command Reference
46-2
This command will reload the designated card.
The standby supervisor can only itself.
Examples
This example shows how to reload card 3.
Switch# reload 3
Reload card ? [no] yes
Switch#
Related Commands
reload
46.3 ha switchover
To do supervisor card active/standby cold switchover.
Command Syntax
ha switchover
Command Mode
Privileged EXEC mode
Usage
If the standby supervisor card is not present, this command can’t take effect.
This command will reload active supervisor card and all line cards; the standby supervisor will switch to
active.
Examples
This example shows how to do active/standby cold switchover
Switch# ha switchover
Building configuration...
force switchover ? [confirm]yes
Switch#
Related Commands
show switchover
46.4 line card SLOT
To enter linecard configuration mode.
Command Syntax
line card <3-6>
line card (<1-6>|<9-14>)