CANOGA PERKINS 9175 Command Reference - Manual (Page 326)

CanogaOS Command Reference
18-7
Switch(config-track)#
Related Commands
Show track
18.10 TRACK RTR REACHABILITY
Create a track object and track the state of an ip sla entry, use the track rtr
reachability to command in global configuration mode. To remove a track, use
the no form of this command.
When the state of ip sla entry is OK or Overthreshold, track object state is up;
otherwise track object state is down.
Command Syntax
track objected rtr entrynumber reachability
no track objectid
Syntax Description
objectid Object identity is used to identify track object, its
range is from 1 to 500;
entrynumber Entry number is used to identify ip sla monitor
entry, its range is from 1 to 500;
Command Mode
Global configuration
Defaults
none
Examples
In the following example, the track rtr reachability command is used to create an track object:
Switch(config)#track 1 rtr 1 reachability
Switch(config-track)#
Related Commands
Show track
18.11 TRACK RTR STATE
Create a track object and track the state of an ip sla entry, use the track rtr
state to command in global configuration mode. To remove a track, use the no
form of this command.