15 l2protocol-discard stp, 16 show l2protocol-tunnel, 17 vlan dot1q tag native – CANOGA PERKINS 9175 Command Reference User Manual
Page 156
CanogaOS Command Reference
9-8
9.15 l2protocol-discard stp
Use this command to enable stp discard on port.
Command Syntax
l2protocol-discard stp
no l2protocol-discard stp
Command Mode
Interface configuration
Usage
Use this command to enable stp discard on port. If user enable stp discard function, all BPDU packets
received by this port should be discarded.
Examples
Switch(config-if)# l2protocol-discard stp
Related Commands
show l2protocol-tunnel
9.16 show l2protocol-tunnel
Use this display current l2 protocol tunnel configuration.
Command Syntax
show l2protocol-tunnel {interface IFNAME | tunnel-dmac}
Command Mode
Privileged EXEC
Usage
Use this display current l2 protocol tunnel configuration or on specified interface.
Examples
Switch # show l2protocol-tunnel interface eth-0-1
Interface Protocol Operation
=========== =========== ============
eth-0-1 stp Tunnel
Related Commands
9.17 vlan dot1q tag native
Use this command to enable tagging all native vlan.