49 show policy-map interface, 50 show running-config class-map – CANOGA PERKINS 9175 Command Reference User Manual
Page 571
CanogaOS Command Reference
31-32
State: attached
CLASS-MAP-NAME: cmp1
trust: cos
CIR 5000 kbps, CBS 40000 bytes, EBS 50000 bytes, color aware mode, drop color is red
Related Commands
None
31.49 show policy-map interface
Use this command to show current interface’s policy-map configuration.
Command Syntax
show policy-map interface NAME
Command Mode
Privileged EXEC
Usage
This command is used to show current interface’s policy-map configuration.
Examples
Switch# show policy-map interface eth-0-1
INPUT-POLICY-MAP-NAME: p-1
CLASS-MAP-NAME: cm1
match access-group: acl
OUTPUT-POLICY-MAP-NAME: plc_map
CLASS-MAP-NAME: cmp1
trust: cos
CIR 5000 kbps, CBS 40000 bytes, PBS 50000 bytes, color aware mode, drop color is red
Switch#
Related Commands
None
31.50 show running-config class-map
Use this command to show running-config class-map information.
Command Syntax
show running-config class-map
Command Mode