29 show ip pim sparse-mode spt-threshold – CANOGA PERKINS 9175 Command Reference User Manual
Page 412
Advertising
CanogaOS Command Reference
24-17
None
Examples
This example shows how to display the information of rp to be chosen based on group 224.0.0.10.
Switch#show ip pim sparse-mode rp-hash 224.0.0.10
% No RP available for this group
Related Commands
None
24.29 show ip pim sparse-mode spt-threshold
Use this command to show the rpt to spt threshold of pim sparse mode.
Command Syntax
show ip pim sparse-mode spt-threshold
Command Mode
EXEC
Usage
None
Examples
This example shows how to display the rpt to spt threshold of pim sparse mode.
Switch#show ip pim sparse-mode spt-threshold
PIM Spare-mode immediately switches over to SPT upon receiving the first traffic
Related Commands
ip pim spt-switch-threshold infinity
Advertising