CANOGA PERKINS 9175 Command Reference - Manual (Page 306)

CanogaOS Command Reference
16-61
Examples
Switch# show ip bgp regexp myexpression
16.93 show ip bgp scan
Use this command to display BGP scan status.
Command Syntax
show ip bgp scan
Command Mode
Privileged Exec mode and Exec mode
Examples
Switch# show ip bgp scan
16.94 show ip bgp summary
Use this command to display a summary of BGP neighbor status.
Command Syntax
show ip bgp summary
show ip bgp ipv4 PREFIX summary
ipv4 Specifies the address family. The type of address family determines the routing table that is
displayed.
PREFIX = multicast|unicast
unicast Specifies a IPv4 unicast address family. This is the default option.
multicast Specifies a IPv4 multicast address family.
Command Mode
Privileged Exec mode and Exec mode
Examples
This is a sample output from the show ip bgp summary command displaying a summary of BGP
neighbor status.
Switch# show ip bgp summary
BGP router identifier 10.10.15.50, local AS number 65000
1 BGP AS-PATH entries
0 BGP community entries
Neighbor V AS MsgRcvd MsgSent TblVer InQ OutQ Up/Down State/
PfxRcd10.10.9.50 4 65000 460 595 0 0 0 00:17:48 3