Show port-trigger – Carrier Access Adit 3000 Series and Multi-Service Router (MSR) Card none User Manual
Page 109
Advertising
Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLI
3-51
Privileged Mode
show port-trigger
Use the show port-trigger command to display the port trigger information.
Syntax:
# show port-trigger
Example:
adit 3500# show port-trigger
Service ID:134217730 Enable Service Name:L2TP
Trigger protocol: UDP port: src_start=0 src_end=0 dst_start=1701
dst_end=1701
Service ID:16777223 Enable Service Name:TFTP
Trigger protocol: UDP port: src_start=1024 src_end=65535 dst_start=69
dst_end=69
Supported Platforms:
Adit 3104, Adit 3200, Adit 3500, MSR
Advertising