Carrier Access Adit 3000 Series and Multi-Service Router (MSR) Card none - Manual (Page 143)

Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLI 4-17
Global Configuration Mode
Global Configuration Commands
help
Use the help command to display the help information for this command. Note: This can also be
accomplished with a ?. This command can be entered in any configuration mode.
Syntax:
(config)# help
or (config)# ?
Example:
(config)# help
? Display all commands
access Permit access via LAN/WAN
access-control Configure access control entries
access-list Define access list
authentication Configure authentication method
clock Internal clock setting
controller Enter Controller context
date Set time/date
delete Delete a feature
dial-peer Enter Dial peer context
dmz-host Configure the DMZ host
do Run Privileged and User mode commands
dynamic-dns Configure DNS Dynamic entries
end End Configuration mode session
exit Exit from Configuration mode
help Display all commands
history Display past entered commands
host-filter Configure IP/hostname filtering entries
interface Configure Ethernet or Serial interface
ip Configure general IP parameters
ipsec Configure IPSEC parameters
key Enable software feature keys
l2tpc Configure L2TP client options
local-server Add local server
log Configure logging
mail-server Configure mail server options
nat-bypass Configure NAT bypass
network-object Configure network objects
no Disable features
port-trigger Configure port trigger
pptpc Configure PPTP client options
.
.
.
Supported Platforms: Adit 3104, Adit 3200, Adit 3500, MSR