Sample configuration, Sample configuration -10 – Carrier Access Adit 3000 Series and Multi-Service Router (MSR) Card none User Manual
Page 376
Advertising
16-10
Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLI
Configuration - OSPF Mode
Sample Configuration
Sample Configuration
ospf
router ospf
no compatible rfc1583
router-id 192.168.3.251
network 192.168.3.0 0.0.0.255 area 0.0.0.1
interface ethernet 1
ip address 192.168.2.251 mask 255.255.255.0
description Ethernet 1
ip mtu auto
no tos ip
tos ip value 0x0
ip default-gateway 0.0.0.0
no ip dhcp auto-provision
no ip primary-dns
no ip secondary-dns
ip route-mode route
no ip default-route
no ip proxy-arp
no ip rip
ip rip receive-version 1or2
ip rip send-version 2-bcast
no firewall
metric 50
no shutdown
speed auto
full-duplex
remote-admin enable
no schedule-availability
ip ospf message-digest-key 1 md5 test
ip ospf authentication-key test2
ip ospf cost 2
Advertising