Ipsec log ike – Carrier Access Adit 3000 Series and Multi-Service Router (MSR) Card none User Manual
Page 148
4-22
Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLI
Global Configuration Mode
Global Configuration Commands
ipsec log ike
Use the ipsec log ike command to enable Internet Key Exchange (IKE) related logs. To disable IKE
logging, see no ipsec log ike command on page 4-40
Syntax:
(config)# ipsec log ike {auto-key|ike-int|ike-msg|msg-byte|
msg-enc-dec|msg_inp|msg-outp|pri-key|rej-packet}
Example:
(config)# ipsec log ike msg-outp
Supported Platforms:
Adit 3104, Adit 3200, Adit 3500, MSR
Field
Definition
auto-key
Enable verbose automatic keying.
ike-int
Enable verbose IKE IPSec interaction.
ike-msg
Print all IKE message ignoring rate limit.
msg-byte
Enable message’s raw byte option.
msg-enc-dec
Enable message’s encryption and decryption.
msg_inp
Enable message’s input structure.
msg-outp
Enable message’s output structure.
pri-key
Enable verbose private key.
rej-packet
Enable verbose IKE reject packets.