Carrier Access Adit 3000 Series and Multi-Service Router (MSR) Card none - Manual (Page 84)

3-26 Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLI
Privileged Mode
show config interface ethernet
Use the show config interface ethernet command to display the Ethernet port information.
Syntax:
# show config interface ethernet port
Example:
adit 3500# show config interface ethernet 1
Interface Ethernet 1
ip address 192.168.1.1 mask 255.255.255.0
description Ethernet 1
no tos ip
tos ip value 0x0
no ip dhcp auto-provision
no ip primary-dns
no ip secondary-dns
ip route-mode route
no ip default-route
no ip proxy-arp
no ip rip
ip rip receive-version 1or2
ip rip send-version 2-bcast
no firewall
metric 50
no shutdown
speed auto
full-duplex
remote-admin enable
no schedule-availability
Supported Platforms: Adit 3104, Adit 3200, Adit 3500, MSR
Field Definition
port Ethernet port to display. Range 1 - 2