Carrier Access Adit 3000 Series and Multi-Service Router (MSR) Card none - Manual (Page 212)

7-2 Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLI
Configuration - DHCP Pool Ethernet Mode
do
Use the do commands to run User and Privileged mode commands. The following are links to the User
and Privileged do commands.
User Mode Commands
date command, on page 2-2
enable command, on page 2-2
end command, on page 2-2
exit command, on page 2-3
help command, on page 2-3
history command, on page 2-4
ping command, on page 2-5
show command, on page 2-6
traceroute command, on page 2-33
Privileged Mode Commands
clear command, on page 3-2
configure terminal command, on page 3-3
copy command, on page 3-3
date command, on page 3-4
debug command, on page 3-5
end command, on page 3-12
exit command, on page 3-12
help command, on page 3-13
history command, on page 3-14
log clear command, on page 3-15
no debug command, on page 3-16
ping command, on page 3-17
reload command, on page 3-18
show command, on page 3-19
traceroute command, on page 3-67
upgrade command, on page 3-67