Carrier Access Adit 3000 Series and Multi-Service Router (MSR) Card none - Manual (Page 26)

2-2 Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLI
User Mode
date
Use the date command to display the current date.
Syntax:
> date
Example:
adit 3500> date
Wed Jan 12 10:37:51 2007
Supported Platforms: Adit 3104, Adit 3200, Adit 3500, MSR
enable
Use the enable command (at the User mode prompt) to enter the Privileged mode. Note: Once a correct
password has been entered, the prompt changes from ">" to "#".
Syntax:
> enable
Example:
adit 3500> enable
password: ********
adit 3500#
Supported Platforms: Adit 3104, Adit 3200, Adit 3500, MSR
end
Use the end command to exit the current Configuration mode. Must be used to mark the end of any
configuration file. Note: This command can be entered in any Configuration mode with the same result.
Syntax:
> end
Example:
Adit 3500> end
Adit 3500 Username:admin
Adit 3500 Password:********
Supported Platforms: Adit 3104, Adit 3200, Adit 3500, MSR