Show service – Carrier Access Adit 3000 Series and Multi-Service Router (MSR) Card none User Manual
Page 51
Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLI
2-27
User Mode
show service
Use the show service command to displays all services.
Syntax:
> show service
Example:
Adit 3500> show service
Group: Basic Web Utilities
Service ID:16777216 Service Name:All Traffic
Trigger protocol: NO PROTOCOL port: src_start=0 src_end=0 dst_start=0 dst_end=0
Service ID:16777217 Service Name:DNS
Trigger protocol: TCP port: src_start=53 src_end=53 dst_start=53 dst_end=53
Service ID:16777217 Service Name:DNS
Trigger protocol: TCP port: src_start=1024 src_end=65535 dst_start=53 dst_end=53
Service ID:16777217 Service Name:DNS
Trigger protocol: UDP port: src_start=53 src_end=53 dst_start=53 dst_end=53
Service ID:16777217 Service Name:DNS
Trigger protocol: UDP port: src_start=1024 src_end=65535 dst_start=53 dst_end=53
Service ID:16777218 Service Name:FTP
Trigger protocol: TCP port: src_start=0 src_end=0 dst_start=21 dst_end=21
Service ID:16777219 Service Name:HTTP
.
.
.
Supported Platforms:
Adit 3104, Adit 3200, Adit 3500, MSR