Destination-pattern, Destination-pattern -2 – Carrier Access Adit 3000 Series and Multi-Service Router (MSR) Card none User Manual
Page 238
Advertising
10-2
Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLI
Configuration - Dial Peer VoIP Mode
destination-pattern
Use the Dial Peer destination-pattern command to define the full telephone number to be used for a
dial peer. To delete a preference, see no destination-pattern command on page 10-5.
Syntax:
(config-dpeer-voip)# destination-pattern
number
Example:
(config-dpeer-voip)# destination-pattern 5551212
Supported Platforms:
Adit 3104, Adit 3500, MSR
Field
Definition
number
Enter the phone number to be used for a dial peer.
Advertising