Carrier Access Adit 3000 Series and Multi-Service Router (MSR) Card none - Manual (Page 445)

C
HAPTER
24
Configuration - Voice Port Trunk Mode
The Voice Port Trunk Configuration commands allow the user to configure the Voice Port Trunk
parameters. Enter this sub-group with the (config)# voice-port trunk number command from the
Configuration mode. Note: The Trunk option is not supported on the Adit 3104 or the Adit 3200.
The Voice Port Trunk commands are represented by the (config-vport-trk-{n})# prompt.
Voice Port Trunk Commands
• comfort-noise
• connection lcc
• connection t1
• description
• digit-map
• do
• echo-cancel
• end
• exit
• history
• input-gain
• isdn switch-type (PRI)
• no commands
• output-gain
• registration
• signal
• trunk