Carrier Access Adit 3000 Series and Multi-Service Router (MSR) Card none - Manual (Page 468)

25-8 Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLI
Configuration - Voice Service SIP Mode
gateway-ip
Use the Voice Service SIP gateway-ip command to set the IP address to be used as the source IP for
VoIP.
Syntax:
(config-voice-serv-sip)# gateway-ip address
Example:
(config-voice-serv-sip)# gateway-ip 10.10.2.1
Supported Platforms: Adit 3104, Adit 3500, MSR
history
Use the history command to display commands that have been entered in this session. This command
can be entered in any configuration mode.
Syntax:
(config-voice-serv-sip)# history
Example:
(config-voice-serv-sip)# history
feature-mode
outbound-proxy
outbound-proxy ip-address 192.168.2.2
dtmf inband
outbound-proxy 192.168.1.140
proxy
proxy-server 10.10.0.1
exit
history
Supported Platforms: Adit 3104, Adit 3500, MSR
Field Definition
address The IP address to be used as the source IP for VoIP services when it
matches one of our up or running interfaces’ IP addresses, otherwise
our VoIP source IP address is determined by the previous automatic
algorithm.