Ip primary-dns, Ip proxy-arp, Ip primary-dns -13 ip proxy-arp -13 – Carrier Access Adit 3000 Series and Multi-Service Router (MSR) Card none User Manual
Page 257
Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLI
11-13
Configuration - Ethernet Interface Mode
ip primary-dns
Use the Ethernet Interface ip primary-dns command to configure the primary DNS.
To delete a
primary DNS, see no ip primary-dns command on page 11-20.
Syntax:
(config-int-eth-{
n})# ip primary-dns address
Example:
(config-int-eth-1)# ip primary-dns 192.168.1.100
Supported Platforms:
Adit 3104, Adit 3200, Adit 3500, MSR
ip proxy-arp
Use the Ethernet Interface ip proxy-arp command to enable proxy ARP on this interface
.
To disable
prosy ARP, see no ip proxy-arp command on page 11-21.
Syntax:
(config-int-eth-{
n})# ip proxy-arp
Example:
(config-int-eth-1)# ip proxy-arp
Supported Platforms:
Adit 3104, Adit 3200, Adit 3500, MSR
Field
Definition
address
Enter the IP address of the primary server.