Carrier Access Adit 3000 Series and Multi-Service Router (MSR) Card none - Manual (Page 93)

Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLI 3-35
Privileged Mode
show controller lcc
Use the show controller lcc command to display the settings for a Link Cross Connect on the MSR
card.
Syntax:
# show controller lcc number
Example:
Adit MSR> show controller lcc 1
Settings for interface LCC 1
---------------------------
Name : LinkCC 1
Device Name : LinkCC 1
Status : Operational
Network : WAN
Connection Type : Link Cross Connect
Connection : Data
Alarm Reporting : Enabled
Supported Platforms: MSR
Field Definition
number Link Cross Connect number, 1-8.