No service, No snmp-server, No snmp-server traps – Carrier Access Adit 3000 Series and Multi-Service Router (MSR) Card none User Manual
Page 176
4-50
Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLI
Global Configuration Mode
Global Configuration Commands
no service
Use the no service command to disable named services. To enable services, see service command
on page 4-59.
Syntax:
(config)# no service
service-id
Example:
(config)# no service-id 16777220
Supported Platforms:
Adit 3104, Adit 3200, Adit 3500, MSR
no snmp-server
Use the no snmp-server command to disable SNMP on the system. To enable SNMP, see snmp-
server command on page 4-60.
Syntax:
(config)# no snmp-server
Example:
(config)# no snmp-server
Supported Platforms:
Adit 3104, Adit 3200, Adit 3500, MSR
no snmp-server traps
Use the no snmp-server traps command to disable SNMP traps on the system. To enable SNMP
traps, see snmp-server traps enable command on page 4-61.
Syntax:
(config)# no snmp-server traps
Example:
(config)# no snmp-server traps
Supported Platforms:
Adit 3104, Adit 3200, Adit 3500, MSR
Field
Definition
service-id
Enter the service number to apply the rule to. Note: The Service ID
number is displayed with the show service command, on page 3-61