Session-timer, Session-timer mode, Session-timer refresher – Carrier Access Adit 3000 Series and Multi-Service Router (MSR) Card none User Manual
Page 478: Session-timer -18
25-18
Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLI
Configuration - Voice Service SIP Mode
session-timer
session-timer mode
Use the Voice Service SIP session-timer mode command to configure the timer mode. To disable
the timer mode, see no session-timer mode command on page 25-10.
Syntax:
(config-voice-serv-sip)# session-timer mode
{requested|supported}
Example:
(config-voice-serv-sip)# session-timer mode requested
Supported Platforms:
Adit 3104, Adit 3500, MSR
session-timer refresher
Use the Voice Service SIP session-timer refresher command to configure the refresher timer.
Syntax:
(config-voice-serv-sip)# session-timer refresher {none|uac|uas}
Example:
(config-voice-serv-sip)# session-timer refresher uas
Supported Platforms:
Adit 3104, Adit 3500, MSR
Field
Definition
requested
System shall initiate Session Timer procedures in outgoing initial
INVITE’s by including a Session-Expires header.
supported
System will respond to a Session-Expires request from a remote proxy
or UAC.
Field
Definition
none
No refresher parameter shall be sent in an INVITE, and any refresher
received from the remote proxy or UAC shall be echoed back.
uac
User Agent Client. Default is UAC.
uas
User Agent Server.