Carrier Access Adit 3000 Series and Multi-Service Router (MSR) Card none - Manual (Page 87)

Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLI 3-29
Privileged Mode
show config ip dhcp ethernet
Use the show config ip dhcp ethernet command to display the DHCP Pool.
Syntax:
# show config ip dhcp ethernet port
Example:
adit 3500# show config ip dhcp ethernet 1
ip dhcp pool ethernet 1
no relay
start-address 192.168.1.1
end-address 192.168.1.244
subnet-mask 255.255.255.0
lease 60
Supported Platforms: Adit 3104, Adit 3200, Adit 3500, MSR
show config local-server
Use the show config local-server command to display the local server configuration.
Syntax:
# show config local-server
Example:
adit 3500# show config local-server
local-server id 0 hostname LocalHost1 time-range 0 fwd-port 160
service 16777216 enable
Supported Platforms: Adit 3104, Adit 3200, Adit 3500, MSR
Field Definition
port Ethernet port to display. Range 1 - 2