No commands, No conference, No outbound-proxy – Carrier Access Adit 3000 Series and Multi-Service Router (MSR) Card none User Manual
Page 469: No prack, No proxy-server, No commands -9
Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLI
25-9
Configuration - Voice Service SIP Mode
no commands
no conference
Use the Voice Service SIP no conference command to disable the conference feature. To enable
conference, see conference command on page 25-2.
Syntax:
(config-voice-serv-sip)# no conference
Example:
(config-voice-serv-sip)# no conference
Supported Platforms:
Adit 3104, Adit 3500, MSR
no outbound-proxy
Use the Voice Service SIP no outbound-proxy command to disable the outbound proxy. To enable
outbound proxy, see outbound-proxy command on page 25-11.
Syntax:
(config-voice-serv-sip)# no outbound-proxy
Example:
(config-voice-serv-sip)# no outbound-proxy
Supported Platforms:
Adit 3104, Adit 3500, MSR
no prack
Use the Voice Service SIP no prack command to disable PRACK. To enable PRACK, see prack
command on page 25-11.
Syntax:
(config-voice-serv-sip)# no prack
Example:
(config-voice-serv-sip)# no prack
Supported Platforms:
Adit 3104, Adit 3500, MSR
no proxy-server
Use the Voice Service SIP no proxy-server command to disable proxy server. To enable proxy
server, see proxy-server command on page 25-12.
Syntax:
(config-voice-serv-sip)# no proxy-server
Example:
(config-voice-serv-sip)# no proxy-server
Supported Platforms:
Adit 3104, Adit 3500, MSR