Ppp restart-timer, Ppp time-btwn-reconnect, Ppp username – Carrier Access Adit 3000 Series and Multi-Service Router (MSR) Card none User Manual
Page 400
17-22
Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLI
Configuration - PPTPC Mode
ppp restart-timer
Use the PPTP Client ppp restart-timer command to configure the PPP restart timer.
To reset to the
default setting, see no ppp restart-timer command on page 17-18.
Syntax:
(config-pptpc-{n})# ppp restart-timer
seconds
Example:
(config-pptpc-1)# ppp restart-timer 15
Supported Platforms:
Adit 3104, Adit 3200, Adit 3500, MSR
ppp time-btwn-reconnect
Use the PPTP Client ppp time-btwn-reconnect command configure the time between reconnect
attempts. To reset to the default setting, see no ppp time-btwn-reconnect command on page 17-19.
Syntax:
(config-pptpc-{n})# ppp time-btwn-reconnect
seconds
Example:
(config-pptpc-1)# ppp time-btwn-reconnect 15
Supported Platforms:
Adit 3104, Adit 3200, Adit 3500, MSR
ppp username
Use the PPTP Client ppp username command set the PPP Login User Name. To delete a PPP user, see
no ppp username command on page 17-19.
Syntax:
(config-pptpc-{n})# ppp username
username
Example:
(config-pptpc-1)# ppp username test-user-name
Supported Platforms:
Adit 3104, Adit 3200, Adit 3500, MSR
Field
Definition
seconds
Range is 1 - 65535 seconds. Default is 3 seconds.
Field
Definition
seconds
Set the interval of time between reconnect attempts.
Range is 0 - 99999 seconds with a default of 0.
Field
Definition
username
Enter the Username, with a maximum of 19 characters.