Carrier Access Adit 3000 Series and Multi-Service Router (MSR) Card none - Manual (Page 375)

Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLI 16-9
Configuration - OSPF Mode
router-id
Use the Router OSPF router-id command to use a fixed router ID. To force OSPF to use the previous
OSPF router ID behavior use the no form of this command, see no router-id command on page 16-8.
Syntax:
(config-ospf)# router-id address
Example:
(router-ospf)# router-id 10.1.1.1
Supported Platforms: Adit 3104, Adit 3200, Adit 3500, MSR
Field Definition
address Router ID in IP address format.