Carrier Access Adit 3000 Series and Multi-Service Router (MSR) Card none - Manual (Page 81)

Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLI 3-23
Privileged Mode
show config access-control
Use the show config access-control command to display all access control filters.
Syntax:
# show config access-control
Example:
adit 3500# show config access-control
access-control id 1 apply-to lan time-range always service 1 enable
Supported Platforms: Adit 3104, Adit 3200, Adit 3500, MSR
show config access-list
Use the show config access-list command to display all access lists.
Syntax:
# show config access-list
Example:
adit 3500# show config access-list
access-list rule 0 apply eth-lan direction in operation accept time-range 0
src-host 0.0.0.0-255.255.255.255 dst-host 0.0.0.0-255.255.255.255 service
50331673 frag none log none (enable)
Supported Platforms: Adit 3104, Adit 3200, Adit 3500, MSR