Carrier Access Adit 3000 Series and Multi-Service Router (MSR) Card none - Manual (Page 164)

4-38 Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLI
Global Configuration Mode
Global Configuration Commands
no date summer-time
Use the no date summer-time command to remove daylight savings time setting. To enable
daylight savings, see date summer-time command on page 4-9.
Syntax:
(config)# no date summer-time
Example:
(config)# no date summer-time
Supported Platforms: Adit 3104, Adit 3200, Adit 3500
Not supported by the MSR
no dial-peer voice pots fxs
Use the no dial-peer voice pots fxs command denies access to the Dial Peer Voice POTS FXS
configuration commands. To allow access, see dial-peer voice command on page 4-11.
Syntax:
(config)# no dial-peer voice pots fxs port
Example:
(config)# no dial-peer voice pots fxs 2 1
Supported Platforms: Adit 3104, Adit 3500, MSR
no dial-peer voice pots trunk
Use the no dial-peer voice pots trunk command denies access to the Dial Peer Voice POTS trunk
configuration commands. To enable access, see dial-peer voice command on page 4-11.
Note: This command is not supported on the Adit 3104.
Syntax:
(config)# no dial-peer voice pots trunk
port tag
Example:
(config)# no dial-peer voice pots trunk 2 1
Supported Platforms: Adit 3500, MSR
Field Definition
port Selects the FXS port to configure.
Adit 3104: Range is 1-24.
Adit 3500: Range is 1-4.
MSR: Range is 1-48.
Field Definition
port Select the trunk port.
Adit 3500: Range = 1-4
MSR: Value must be 1.
tag Set destination range. Range is 1-30.