Mail-server port, Mail-server username – Carrier Access Adit 3000 Series and Multi-Service Router (MSR) Card none User Manual
Page 160
4-34
Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLI
Global Configuration Mode
Global Configuration Commands
mail-server port
Use the mail-server port command to set the outgoing mail server port.
Syntax:
(config)# mail-server port
port
Example:
(config)# mail-server port 25
Supported Platforms:
Adit 3104, Adit 3200, Adit 3500, MSR
mail-server username
Use the mail-server username command to set the username and password for the mail server.
Syntax:
(config)# mail-server username
username password password
Example:
(config)# mail-server username server10 password secret10
Supported Platforms:
Adit 3104, Adit 3200, Adit 3500, MSR
Field
Definition
port
Enter the port number. Range is 0 - 65535. Default is 25.
Field
Definition
username
Enter the mail server username.
password
Enter the mail server password for this server.