Carrier Access Adit 3000 Series and Multi-Service Router (MSR) Card none - Manual (Page 406)

18-4 Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLI
Configuration - PPTPS Mode
history
Use the history command to display commands that have been entered in this session. This command
can be entered in any configuration mode.
Syntax:
(config-pptps)# history
Example:
(config-pptps)# history
ppp
end-address 192.168.1.175
ppp encryption
ppp authentication pap
idle-time 99999
start-address 192.168.1.1
history
Supported Platforms: Adit 3104, Adit 3200, Adit 3500, MSR
idle-time
Use the PPTP Server idle-time command to set the maximum idle time for a PPTP connection.To reset
the idle-time to the default setting, see no idle-time command on page 18-5.
Syntax:
(config-pptps)# idle-time seconds
Example:
(config-pptps)# idle-time 1500
Supported Platforms: Adit 3104, Adit 3200, Adit 3500, MSR
Field Definition
seconds Enter the maximum idle time for PPTP connection.
Range 0-99999 seconds, with a default of 1200.