No dial-peer voice voip, No dmz-host, No dynamic-dns – Carrier Access Adit 3000 Series and Multi-Service Router (MSR) Card none User Manual
Page 165
Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLI
4-39
Global Configuration Mode
Global Configuration Commands
no dial-peer voice voip
Use the no dial-peer voice voip command denies access to the Dial Peer Voice VoIP configuration
commands. To allow access, see dial-peer voice command on page 4-11.
Syntax:
(config)# no dial-peer voice voip
tag
Example:
(config)# no dial-peer voice voip 1
Supported Platforms:
Adit 3104, Adit 3500, MSR
no dmz-host
Use the no dmz-host command to remove a DMZ host. To add a DMZ hose, see dmz-host
command on page 4-12.
Syntax:
(config)# no dmz-host
address
Example:
(config)# no dmz-host 10.10.200.1
Supported Platforms:
Adit 3104, Adit 3200, Adit 3500, MSR
no dynamic-dns
Use the no dynamic-dns commands to disable DNS Dynamic entries. To enable DNS Dynamic
entries, see dynamic-dns command on page 4-14.
Syntax:
(config)# no dynamic-dns {backup-mx|interface|mail-exchanger
|offline|wildcard}
Example:
(config)# no dynamic-dns backup-mx
Supported Platforms:
Adit 3104, Adit 3200, Adit 3500, MSR
Field
Definition
tag
Enter the tag number to denies access. Range is 1-30.
Field
Definition
address
The IP address of the DMZ host.
Field
Definition
backup-mx
Disable DNS Dynamic Backup MX.
interface
Specify DNS Dynamic connection to update.
mail-exchanger
Remove mail exchanger.
offline
Disable DNS Dynamic offline.
wildcard
Disable DNS Dynamic wildcard.