Carrier Access Adit 3000 Series and Multi-Service Router (MSR) Card none - Manual (Page 198)

5-6 Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLI
Configuration - LCC Controller Mode
shutdown
Use the Controller LCC shutdown command to set the LCC interface down (out-of-service). To set the
LCC up (in-service), see the no shutdown command on page 5-5.
Syntax:
(config-cont-lcc-{ n})# shutdown
Example:
(config-cont-lcc-1)# shutdown
Supported Platforms: MSR