Carrier Access Adit 3000 Series and Multi-Service Router (MSR) Card none - Manual (Page 227)

Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLI 8-9
Configuration - Dial Peer FXS Mode
no codec preference
Use the Dial Peer no codec preference command to remove a codec preference. To set the codec
preferences, see codec preference command on page 8-3.
Syntax:
(config-dpeer-fxs)# no codec preference {1|2|3}
Example:
(config-dpeer-fxs)# no codec preference 1
Supported Platforms: Adit 3104, Adit 3500, MSR
no sip-authentication
Use the Dial Peer no sip-authentication command to disable SIP authentication. To enable SIP
authentication, see sip-authentication command on page 8-10.
Syntax:
(config-dpeer-fxs)# no sip-authentication
Example:
(config-dpeer-fxs)# no sip-authentication
Supported Platforms: Adit 3104, Adit 3500, MSR
Field Definition
1|2|3 Remove a specific codec preference. Range 1 - 3