Carrier Access Adit 3000 Series and Multi-Service Router (MSR) Card none - Manual (Page 127)

C
HAPTER
4
Global Configuration Mode
The Global Configuration Mode allows commands to be entered directly to the router configuration.
From this level, additional configuration modes can be entered. Once configuration is complete, use the
exit/end command to return to the Privileged Mode prompt.
This Mode is entered with the # configure terminal command from the Privileged mode.
The Global Configuration Mode is represented by the (config)# prompt.
Note: The Trunk option is not available on the Adit 3104.
In This Chapter
„
Commands for Entering Configuration Submodes
„
Global Configuration Commands