Carrier Access Adit 3000 Series and Multi-Service Router (MSR) Card none - Manual (Page 24)

1-6 Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLI
Introduction
Shortcuts
Shortcuts
Keystroke Description
Up Arrow Use the up arrow key to re-display a previously entered command. Select the
up arrow repeatedly, to scroll through all the commands entered starting with
the most recent.

Left and Right Arrow
Will move curser one character to the left or right.
?
The question mark will display help for the current command.
[Tab] Select the Tab key after entering a partial (but unique) portion of the CLI
command. This will result in the completion of a portion of the command
and will wait for further input.
Example:
(config)#sn [Tab]
(config)#snmp-server
auto complete You need only enter enough letters to identify a command as unique. For
example, entering cont t1 1 at the Global configuration prompt provides you
access to the configuration parameters for the specified T1 interface.
Entering controller t1 1 would work as well, but is not necessary.
Backspace Erases the character to the left.
History The history shows up to a total of 100 commands. The history command will
show only the executed commands for the current mode/context.
[Ctrl+A] Moves the curser to the beginning of the command line.
[Ctrl+E] Moves the curser to the end of the command line.
[Ctrl+U] Clears the current displayed command line.
[Ctrl+Z] Exits from the current mode.